Q1.
Which memory card formats are supported by Memory Card Gateway
MCG-150?
Memory Card Gateway (MCG-150) directly reads from and writes to:
CompactFlash (including Extreme III, IV, and UDMA cards), MicroDrive,
Secure Digital, SDHC, MMC, miniSD, RS-MMC, MicroSD, TransFlash,
MMCmicro, Memory Stick, MS PRO, MS Duo, MS PRO Duo, xD (including
M-Type & H-Type), SmartMedia. It also supports MS M2 with
adapter.
Q2. Is
Memory Card Gateway Vista compatible? Is it Mac compatible? Do
I need to install drivers?
Yes, Memory Card Gateway is compatible with both PC (Windows Vista,
XP, 2000 SP4) and Mac (10.x & later). There is no software
driver installation required for the above operating systems.
For Windows 98SE, and Mac OS 9.0, you need to first install device
driver before the computer can recognize Memory Card Gateway.
» [10 MB]
» [38KB]
Q3. I do not
see the picture icons for different memory card drives on my computer.
You need to install the Icon Utility. This program will assign
descriptive icons and labels for each memory card slot. (Windows
only)
»
Q4. I
am having trouble figuring out which memory card fits which card
slot.
Memory Card Gateway has 5 card slots that allow you to simultaneously
access and transfer data between the 5 card slots* and your computer.
*EXCEPTION: SD/MMC and microSD/MMCmicro cannot be used simultaneously.
See the following illustration for card slot description:
Each memory card should be inserted as described below:
(1) CF/MD: Insert the card label side facing up.
(2) xD/SmartMedia: Insert the card with gold connector side facing
up.
*For xD, position the card against the left side of the slot.
(3) SD/miniSD/MMC/RS-MMC: Insert the card with label side facing
up.
*For miniSD, position the card in the middle of the slot.
(4) MicroSD/MMCmicro : Insert the card with label side facing up.
*For MicroSD/TransFlash, position against the right side of the
slot.
*For MMCmicro, position the card against the left side of the slot.
(5) MS/MS Duo: Insert the card with label side facing up.
*Also supports MS M2 (MS Micro) card with adapter.
Q5. I
am using Mac and am having trouble seeing my memory card on the
computer.
Try inserting your memory card into Memory Card Gateway before
you connect Gateway to your computer via USB cable.
|
